Free tool
Flight time from Beijing to Melbourne
About 11 hours and 35 minutes non-stop, 9,112 km (5,662 miles), with your local arrival time and the time difference.
Estimate for a direct flight from Beijing (PEK, Beijing Capital) to Melbourne (MEL, Tullamarine). Change the departure time below to see your local arrival time.
How long is the flight from Beijing to Melbourne?
A non-stop flight from Beijing to Melbourne takes about 11 hours and 35 minutes. The two cities are 9,112 km (5,662 miles) apart in a straight line, measured between Beijing Capital (PEK) and Tullamarine (MEL).
This is a long-haul route. If there is no direct flight on your dates, a connection through a hub usually adds 2–6 hours to the journey.
The estimate assumes an average speed of about 830 km/h plus around 35 minutes for taxiing, take-off and landing. Real schedules vary with the airline, aircraft, route and winds – heading east with the jet stream, flights are often a little quicker than this. Check your booking for the exact time.
Time difference and arrival time
Melbourne is 3 hours ahead of Beijing right now. A flight leaving Beijing at 10:00 local time lands at about 00:35 local time in Melbourne the next day. With a 3h shift, expect some jet lag: as a rough guide the body adjusts by about an hour a day, and flying east (as on this trip) is usually harder than the other way.
Current time in Beijing · Current time in Melbourne · Flight time from Melbourne to Beijing
More flights from Beijing
- Beijing to Seoul 1h 40m
- Beijing to Shanghai 1h 55m
- Beijing to Hong Kong 3h
- Beijing to Tokyo 3h 5m
- Beijing to Hanoi 3h 25m
- Beijing to Manila 4h 5m
- Beijing to Johannesburg 14h 40m
- Beijing to Mexico City 15h 35m
- Beijing to Miami 15h 35m
- Beijing to Cancún 16h
More flights from Melbourne
- Melbourne to Sydney 1h 25m
- Melbourne to Auckland 3h 45m
- Melbourne to Bali 5h 50m
- Melbourne to Jakarta 6h 50m
- Melbourne to Singapore 7h 50m
- Melbourne to Manila 8h 10m
- Melbourne to Moscow 18h
- Melbourne to Istanbul 18h 15m
- Melbourne to Cancún 18h 20m
- Melbourne to Athens 18h 35m
Why arrival times look strange
Airline schedules always show local times: departure in the departure city’s time and arrival in the arrival city’s time. Fly east and you “lose” hours – a 7-hour flight from New York to London leaving at 19:00 lands at 07:00 the next morning. Fly west and you gain them, which is how you can land in Los Angeles almost at the same clock time you left Tokyo. This calculator handles the time zones and daylight saving time for you.
How the flight time estimate works
In estimate mode the calculator measures the great-circle distance between the two cities – the shortest route over the Earth’s surface – and assumes an average speed of about 830 km/h (515 mph), plus around 35 minutes for taxiing, take-off and landing. That gives a good guide for a non-stop flight. Real schedules vary with the airline, aircraft, winds and route: flights heading east with the jet stream are often quicker than the same trip heading west, so always check your booking for the exact time.
Frequently asked questions
How long is the flight from Beijing to Melbourne?
A direct flight from Beijing to Melbourne takes about 11 hours and 35 minutes. This is an estimate based on the distance; airline schedules can be shorter or longer depending on the route and winds.
How far is Melbourne from Beijing?
The straight-line (great-circle) distance between Beijing and Melbourne is about 9,112 km, or 5,662 miles.
What is the time difference between Beijing and Melbourne?
Melbourne is 3 hours ahead of Beijing at the moment.